Eheim Thermocontrol e Heater-200W

The obvious ideas are often the best. This also applies to the aquarium heating element. It is simply hung in the water and heats it up. The principle is the same as it was decades ago. But in the meantime, the EHEIM controller heater has become an ultra-modern thermal device. The temperature can be set precisely and is measured even more precisely and kept more constant by the electronics. The coating made of special laboratory glass increases the heating surface, serves as a heat shield and ensures even heat emission.

Eheim Thermocontrol e Heater-100W

Diameter: 36mm
Min. temp: 20 degrees
Max. temp: 32 degrees
Performance at 50 Hz: 100 Watt
For aquariums of about.: 100L
For aquariums up to approx.: 150L
Height: 309mm
Freshwater: Yes
Seawater: Yes

Eheim Thermocontrol e Heater-300W

Diameter: 36mm
Min. temp: 20 degrees
Max. temp: 32 degrees
Performance at 50 Hz: 300 Watt
For aquariums of about.: 600L
For aquariums up to approx.: 1000L
Height: 496mm
Freshwater: Yes
Seawater: Yes

Eheim Thermocontrol e Heater-400W

Diameter: 36mm
Min. temp: 20 degrees
Max. temp: 32 degrees
Performance at 50 Hz: 400 Watt
For aquariums of about.: 1000L
For aquariums up to approx.: 1200L
Height: 496mm
Freshwater: Yes
Seawater: Yes

Advantages of the EHEIM control heater thermocontrol-e

Precise temperature adjustment from 20 to 32 °C
No readjustment necessary
Control accuracy ± 0.5 °C
The heat is kept constant
Control lamp indicates the heating function (red: heating up; green: temperature reached)
Fully submersible (waterproof)
With dry-running protection (Thermo Safety Control)
Glass coating increases the heating surface and ensures optimum, even heat output
Convenient cable length approx. 170 cm
Including double suction holder
Suitable for fresh and marine water
Highest safety and reliability - 3 years warranty
Made in Germany